diff --git a/boot/ro-root.sh b/boot/ro-root.sh
deleted file mode 100644
index 759419f..0000000
--- a/boot/ro-root.sh
+++ /dev/null
@@ -1,120 +0,0 @@
-#!/bin/sh
-
-#  Read-only Root-FS for Raspian using overlayfs
-#  Version 1.1:
-#  Changed to use /proc/mounts rathern than /etc/fstab for deriving the root filesystem.
-#
-#  Version 1:
-#  Created 2017 by Pascal Suter @ DALCO AG, Switzerland to work on Raspian as custom init script
-#  (raspbian does not use an initramfs on boot)
-#
-#  This program is free software: you can redistribute it and/or modify
-#  it under the terms of the GNU General Public License as published by
-#  the Free Software Foundation, either version 3 of the License, or
-#  (at your option) any later version.
-#
-#  This program is distributed in the hope that it will be useful,
-#  but WITHOUT ANY WARRANTY; without even the implied warranty of
-#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-#  GNU General Public License for more details.
-#
-#    You should have received a copy of the GNU General Public License
-#    along with this program.  If not, see
-#    <http://www.gnu.org/licenses/>.
-#
-#
-#  Tested with Raspbian mini, 2017-01-11
-#
-#  This script will mount the root filesystem read-only and overlay it with a temporary tempfs
-#  which is read-write mounted. This is done using the overlayFS which is part of the linux kernel
-#  since version 3.18.
-#  when this script is in use, all changes made to anywhere in the root filesystem mount will be lost
-#  upon reboot of the system. The SD card will only be accessed as read-only drive, which significantly
-#  helps to prolong its life and prevent filesystem coruption in environments where the system is usually
-#  not shut down properly
-#
-#  Install:
-#  copy this script to /sbin/overlayRoot.sh and add "init=/sbin/overlayRoot.sh" to the cmdline.txt
-#  file in the raspbian image's boot partition.
-#  I strongly recommend to disable swapping before using this. it will work with swap but that just does
-#  not make sens as the swap file will be stored in the tempfs which again resides in the ram.
-#  run these commands on the booted raspberry pi BEFORE you set the init=/sbin/overlayRoot.sh boot option:
-#  sudo dphys-swapfile swapoff
-#  sudo dphys-swapfile uninstall
-#  sudo update-rc.d dphys-swapfile remove
-#
-#  To install software, run upgrades and do other changes to the raspberry setup, simply remove the init=
-#  entry from the cmdline.txt file and reboot, make the changes, add the init= entry and reboot once more.
-
-fail(){
-        echo -e "$1"
-        /bin/bash
-}
-
-# load module
-modprobe overlay
-if [ $? -ne 0 ]; then
-    fail "ERROR: missing overlay kernel module"
-fi
-# mount /proc
-mount -t proc proc /proc
-
-# create a writable fs to then create our mountpoints
-mount -t tmpfs inittemp /mnt
-if [ $? -ne 0 ]; then
-    fail "ERROR: could not create a temporary filesystem to mount the base filesystems for overlayfs"
-fi
-mkdir /mnt/lower
-mkdir /mnt/rw
-mount -t tmpfs root-rw /mnt/rw
-if [ $? -ne 0 ]; then
-    fail "ERROR: could not create tempfs for upper filesystem"
-fi
-mkdir /mnt/rw/upper
-mkdir /mnt/rw/work
-mkdir /mnt/newroot
-
-# mount root filesystem readonly
-rootDev=`awk '$2 == "/" {print $1}' /proc/mounts`
-rootMountOpt=`awk '$2 == "/" {print $4}' /proc/mounts`
-rootFsType=`awk '$2 == "/" {print $3}' /proc/mounts`
-mount -t ${rootFsType} -o ${rootMountOpt},ro ${rootDev} /mnt/lower
-if [ $? -ne 0 ]; then
-    fail "ERROR: could not ro-mount original root partition"
-fi
-mount -t overlay -o lowerdir=/mnt/lower,upperdir=/mnt/rw/upper,workdir=/mnt/rw/work overlayfs-root /mnt/newroot
-if [ $? -ne 0 ]; then
-    fail "ERROR: could not mount overlayFS"
-fi
-# create mountpoints inside the new root filesystem-overlay
-mkdir /mnt/newroot/ro
-mkdir /mnt/newroot/rw
-# remove root mount from fstab (this is already a non-permanent modification)
-grep -v "$rootDev" /mnt/lower/etc/fstab > /mnt/newroot/etc/fstab
-echo "#the original root mount has been removed by overlayRoot.sh" >> /mnt/newroot/etc/fstab
-echo "#this is only a temporary modification, the original fstab" >> /mnt/newroot/etc/fstab
-echo "#stored on the disk can be found in /ro/etc/fstab" >> /mnt/newroot/etc/fstab
-# change to the new overlay root
-cd /mnt/newroot
-pivot_root . mnt
-exec chroot . sh -c "$(cat <<END
-# move ro and rw mounts to the new root
-mount --move /mnt/mnt/lower/ /ro
-if [ $? -ne 0 ]; then
-    echo "ERROR: could not move ro-root into newroot"
-    /bin/bash
-fi
-mount --move /mnt/mnt/rw /rw
-if [ $? -ne 0 ]; then
-    echo "ERROR: could not move tempfs rw mount into newroot"
-    /bin/bash
-fi
-# unmount unneeded mounts so we can unmout the old readonly root
-umount /mnt/mnt
-umount /mnt/proc
-umount -l -f /mnt/dev
-umount -l -f /mnt
-# continue with regular init
-exec /sbin/init
-END
-)"
\ No newline at end of file